Harbor Freight Tools 90262 - Manual (Page 3)

Page 3 SKU 90262
8. Maintain products with care. Keep the Meat Grinder sharp and clean for better and
safer performance. Follow instructions for changing accessories. Inspect the tool cord
periodically, and if damaged, have it repaired by an authorized technician.
9. Disconnect power. Unplug product when not in use.
10. Avoid unintentional starting. Be sure the switch is in the Off position when not in
use and before plugging in.
11. Stay alert. Watch what you are doing, use common sense. Do not operate any product
when you are tired.
12. Check for damaged parts. Before using any product, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the Meat Grinder if the switch does not turn On and Off properly.
13. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
14. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this product. Approved accessories are available from Harbor
Freight Tools.
15. Do not operate product if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the Meat Grinder.
16. Use proper size and type extension cord. If an extension cord is required, it must be
of the proper size and type to supply the correct current to the tool without heating up.
Otherwise, the extension cord could melt and catch fire, or cause electrical damage to
the tool. This tool requires use of an extension cord with up to 10 amps capability (up
to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size
wire. If you are using the tool outdoors, use an extension cord rated for outdoor use.
(signified by “WA” on the jacket).
17. Maintenance. For your safety, service and maintenance should be performed only by
a qualified technician.
18. Pacemaker safety warning. People with pacemakers should consult with their
physician(s) before using this product; operation of equipment in close proximity to a
heart pacemaker could cause interference or failure of the pacemaker.
19. Always use the Pusher (13). When using the Meat Grinder, never use your hands,
fork, spoon, or other utensils to push meat into the grinder. Be sure the on/off switch
is in the OFF position until you complete all preparations for grinding.
20. Handle blades carefully. Be alert when handling sharp blades - especially the Star
Cutter (8).
21. Unplug unit. When you are finished grinding, unplug the unit. Never attempt to clean
the unit, or change accessories, unless the unit is unplugged.
REV 05/04