haier HDM3.5-1 - Manual (Page 6)

Installation Instructions
Where to place your dryer
Place the dryer in a dry, well ventilated area, away
from heat and direct sunlight.
If the dryer is not wall mounted, it must be placed on
a firm level surface. Do not place the dryer on carpet
as this will block the intake. There should be at least
100mm between the dryer and the walls.
6
Fit the legs that come with the dryer to ensure
stability.
Leg
If the dryer is permanently mounted, at least
100mm between the dryer and walls is required.
Wall Mounting Instructions
1. Determine the location of the dryer on the
wall and mark the bracket position.
* A minimum 50mm is needed between the top of
the dryer and the ceiling for ease of installation.
* If mounting above a washing machine, allow
sufficient room to open the lid of the washer.
Tools Required
Drill & 3mm Bit 1
Philips Head Screw Driver 1
For Plaster/
Wooden Wall Wood Screws, 1 2g x
4
50mm Timber Screws
Wall Mounting Kit Includes
Description Wall Hanging Brackets 2
Hook 1
Plastic Spacers 2
Exhaust Duct 4 pieces
2. Fix the wall hanging brackets to the wall securely
(eg. into the stud.) If the studs are too far apart fit a
timber slat to the studs then mount the brackets
onto the slat. The distance between each bracket
is 155mm as per diagram.
Ensure brackets are
securely fastened. Fit
timber slats if necessary