Huffy RC3200 - Manual (Page 12)

12
P/N 211657B 04/03
½
Secure board and elevator tube assembly to pole assembly as shown. Finger tighten.
IMPORTANT!
DO NOT OVER
TIGHTEN.
4
6
38
38
40
4
TWO PERSON MINIMUM
REQUIRED FOR THIS
PROCEDURE. NOT
FOLLOWING
RECOMMENDATION
MAY RESULT IN
SERIOUS BODILY
INJURY AND/OR
PROPERTY DAMAGE.
WARNING
Insert spacer (41) through top
holes of height indicator cover
(31) and screw jack assembly
as shown. Align spacer and
screw jack assembly between
elevator tubes (34) and secure.
IMPORTANT!
WHEN SECURING SCREW JACK (20) TO
TOP ELEVATOR TUBES (34), USE
SPACER (41) BETWEEN ELEVATOR
TUBES AS SHOWN.
NOTE:
NOW COMPLETELY TIGHTEN ALL
BOLTS FROM STEPS 13-22. 4
40
4
6
SCREW JACK
ASSEMBLY
21.
22.
SAWHORSE OR SUPPORT TABLE
41
25