haier HLC32 - Manual (Page 40)

Preparations
Press the DVD on the remote control to enter the DVD status.
Note
The unit do not allow you re-enter the DVD mode again in order to prevent damage to the DVD disc.
Wait for 10 second to enter again.
Basic playback
1. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray.
If there is no disc placed on the disc tray in DVD mode, OPEN will display on the
screen all the time)
. Place the disc in the
correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and
cause the DVD player to malfunction.
Do not place a disc which is unplayable in this DVD player.
2. Press OPEN/CLOSE to close the disc tray, the playback will automatically start.
Some disc may not playback automatically, you can press PLAY button to start playback.
3. Some disc may start playback with a menu, use the cursor button on the remote
control to select menu options and press PLAY to start, or press digits to select a menu
options directly.
The DVD player will only play 4 in. diameter DVD and CD discs
Stop playback
1. Press STOP button to go to stop mode, the TV screen will show the start-up logo.
For some disc the player can recall the location where stopped, such as DVDs and
audio CDs.
2. Press PLAY to resume playback from the location where playback is stopped.
3. Press STOP twice to stop completely.
Pause playback
1. Press PAUSE/STEP/REC to pause playback (still mode).
The sound will be muted during still mode.
2. Press PLAY to resume normal playback.
Note: The
REC button is a universal remote control code, unuseful in this TV.
Previous and Next
Fast forward and Fast reverse
During playback, press PREV key can go back to the beginning of this chapter, then
each press of this key will skip a chapter till the start of the disc. (note: Disc function may
vary depending on disc format)
Each press of NEXT key during playback will skip the current chapter and play the
next one.
1. Press Forward to fast forward through the disc. Each time the Forward button
is pressed, the fast forward motion speed changes. It would cycle through 2X, 4X, 8X,
16X, 32X and normal.
2. Press PLAY to resume normal playback.
3. Press REV
to fast reverse through the disc. Each time the REV button is
pressed, the fast reverse motion speed changes. It would cycle through 2X, 4X, 8X,
16X, 32X and normal.
4. Press PLAY to resume normal playback.
Single step playback
1. Press the PAUSE/STEP button to pause the playback.
2. To view the next frame, press the PAUSE/STEP button. Each press of the PAUSE/
STEP button advances the film by one frame.
Basic Playback
DVD Operation
Operation
40 TV LCD-TFT
TV/DVD
PROGRAM SLOW
CC
CH.LIST
SETUP
ANGLE
SEARCH
AU
DIO
SUBTITLE
REPEAT
SUBTITLE D.MENU
P.MOD E S.MODE
D.C
AL
L
FREEZE
EN
U
IN
FO
E X IT
R A C
S A P
SLE EP
VOL + CH+
10+
Q.VIEW
OK
VOL - CH-
A-B
SELECT
TITLE/PBC
ZOOM
TIME INPUT