Harbor Freight Tools 90749 - Manual (Page 2)

SKU 90749 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
Item Description
Air Tank Capacity 8 Gallons
Air Tank Design Wheelbarrow Dual Tank System
Maximum Air PSI 115 PSI
Cubic Feet Per Minute Rating 10.3 CFM @ 40 PSI / 8.5 CFM @ 90 PSI
Air Outlet Size 3/8” NPT
Tank Drain Valve Design Duel Bottom Tank Bleeders
Automatic Compressor Shut-Off Yes, At 115 PSI
Compressor Cylinder/Crankshaft Construction Cast Iron
Wheel Size / Type 10”, 4.10/8.5-4, Pneumatic
Power Source 6.5 HP Briggs & Stratton®
Intek® Gasoline Engine
Engine Displacement: 206cc
Recoil Start
Never use compressed air on yourself or another to blow off clothing, skin or hair.
REV 10/05; REV 02/06