Humax DV-1000T - Manual (Page 25)

**
2.3 Powering On
1. Connect the power cord of the receiver to a wall outlet.
2. Turn on the power button, located at the left on the back of
the receiver.
Make sure that the Standby LED indicator is turned on
Red.
3. Power on by pressing the STANDBY button at
Remote Controller or the STANDBY button at the front
of the receiver.
**
**
2. Setup
GB 24
**
**
**
**
**
**
**
**
**
**
**
**
**
**