Humminbird Wide Eye - Manual (Page 30)

The Wide Side transducer contains 3 different elements which transmit signals to the left, right,
and straight down from your boat. The downward beam is 200 kHz with a 24 degree area of
coverage. This beam maintains a continuous digital depth readout from the bottom directly
beneath your boat. The side beams are 455 kHz with a 16 degree area of coverage. These side-
looking elements can be used independently, or together to locate targets near the surface of the
water on either side of your boat.
The Wide Side transducer is available as a trolling motor mount, a transom mount, or a portable
mount.
Wide Side can be connected directly to your Wide Eye unit in place of the dual beam transducer,
or used in conjunction with a transducer switch so both transducers can be connected to the
Wide Eye. See "Installing the Wide Eye" for additional information.