HONDA DB752A - Manual (Page 9)

ASSEMBLY INSTALLATION
4. Carefully drive a 3/16” roll pin into the
hole in the adjustment pin. The roll pin
should extend
an equal distance from
both sides of the adjustment pin.
5. the female quick-hitch to obtain the
desired blade angle, align the adjustment
pin holes and then insert the
adjustment pin.
NOTE sure that the pin extends through
the bottom plate of the hitch box.
6. Slide the shoes into the brackets on
the back of the blade.
7. Set each shoe to provide the proper
amount of blade clearance (refer to the
Operation Section on page
and then
insert a shoe pin through the
bracket and shoe. Secure the shoe
pins with 3 x 65 mm spring pins.
ATTACHING THE BLADE
TO THE TRACTOR
Carefully slide the female hitch onto the
tractor’s male quick-hitch. Move the
hitch lever to
“LOCK”, and secure it with a
linch pin a s shown.
3 x 65 SPRING PIN,
7