Harbor Freight Tools 94029 - Manual (Page 5)

SKU 94029 For technical questions, please call 1-800-444-3353. Page 5
21. Maintain tools with care. Keep cutting tools sharp and clean. Properly
maintained tools with a sharp cutting edge are less likely to bind and are easier
to control. Do not use a damaged tool. Tag damaged tools “Do not use” until
repaired.
22. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tool’s operation. If damaged,
have the tool serviced before using. Many accidents are caused by poorly
maintained tools.
23. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Always wear ANSI-approved safety impact eye goggles, hearing protec-
tion, and a dust mask or respirator when operating this product.
2. The sound rating for this product is 107-112 dB. The operator should al-
ways wear ANSI-approved hearing protection when using this product.
3. WARNING! The Collector Body (27) of this product contains a high speed
Impeller (20) that can amputate fingers, grab loose clothing and long hair, and
propel sawdust at high velocities. NEVER operate this product without the Inlet
Cover (25), Safety Screen (26), and all other parts in place and working properly.
(See Assy. Diagram.)
4. CAUTION! If using this product to help keep airborne sawdust within
acceptable limits, you must regularly monitor airborne sawdust and maintain the
Dust Collection system to avoid exceeding dust limits. Each application is
unique, and your maintenance schedule must be tailored to your specific use of
the Dust Collector.