Husqvarna 225B - Manual (Page 3)

English –
3
INTRODUCTION
!
WARNING!
Under no circumstances should
you modify the original design of
the blower without approval from
the manufacturer. Always use
genuine spare parts. Unauthorised
modifications or accessories may
lead to serious injury or death.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to
modify the design and appearance of products
without prior notice.
This operator’s manual describes in detail how to
use and service the blower and how to carry out
regular maintenance. It also describes which meas-
ures should be taken to achieve maximum safety
while operating the blower, how the safety devices
work and how they should be serviced.
Note! The section of the manual that deals with
safety, must be read and understood by all persons
who come in contact with the blower.
This operator’s manual has been written for those
who need guidance when it comes to fault tracing,
thorough servicing and carrying out corrective
maintenance of the blower.
There are warning symbols on the blower. These
are illustrated on page 4. Should any of the warning
symbols on the blower become disfigured or worn,
new ones should be ordered and fitted to the blower
as soon as possible. Note that some of the warning
symbols are molded in certain components of the
blower.
The blower is used for blowing away leaves and
other debris on the ground. When operating the
blower, the operator must stand with both feet firmly
on the ground.