Harbor Freight Tools 95088 - Manual (Page 2)

Page 2 SKU 95088 For technical questions, please call 1-800-444-3353.
PRODuCT SPECIFICATIONS
Electrical Requirements 120 VAC, 60 Hz, 3.5 Amps
Speed
2,000 RPM, 5/8” Stroke
Oscillating Range 58 OPM
Dust Port 1-1/2” OD
Construction 100% sealed ball bearing construction
Table Size 14-11/32” L x 11-15/32” W
Overall Dimensions 15-9/16” L x 14-1/8” W x 17” H
Spindle Dimensions 10 x 1.5 mm thread
Tool Weight 33 Lb.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RuLES
WARNING!
READ AND uNDERSTAND ALL INSTRuCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE ThESE INSTRuCTIONS
WORk AREA
1. keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents. Make sure there is adequate surrounding workspace.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
236479