haier XPB50-ASP - Manual (Page 10)

Figure 5
DRAIN
STRONG
SOFT
WASH SELECTOR
8
OFF
OFF
OFF
DRAIN
STRONG
SOFT
MAX
Washing sequence
Figure 1
Figure 2
WOOL WOOL
Spin timer
SPIN TIMER
SPIN WASH
Wash timer
WASH TIMER
WASH SELECTOR
Wash selector
Buzzer
BUZZER
Water-filling entrance
(To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
LINEN
(Soft current,
strong current)
(The buzzer will ring when
the washing finishes)
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Wash
SILK SILK
COTTON
Figure 4
OFF
WOOL
WASH TIMER
LINEN
SILK
COTTON
Figure 3
DRAIN
STRONG
SOFT
WASH SELECTOR
1.Water-filling selector
(1) Set the water-filling selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the
laundries. (Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Overfilling sign
Water-filling selector handle