beautypg.com

Product specifications, Warning – Hitachi 32PD5000 User Manual

Page 40

background image

Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer.

Customer servicing can be hazardous.

WARNING

Symptom

Point to check

See page

• The screen becomes dark and the images cannot be seen

during VTR special playback (fast forward, rewind).

• This sometimes occurs when a component output VTR such as the

480i is connected.

This is not a malfunction; therefore, please take note that this may
occur. When it does occur, change to composite output, or S.video
output.

TROUBLESHOOTING

Symptoms That Seemingly Appear to be Failures

This table shows the specifications when the optional video unit has been inserted.

PRODUCT SPECIFICATIONS

• The monitor takes at least 30 minutes to attain the status of optimal picture quality.

Panel

Display
dimensions

Approx. 32 inches (716 (H) x 399 (V) mm, diagonal 820mm)

Approx. 42 inches (922 (H) x 522 (V) mm, diagonal 1059mm)

Resolution

852 (H) x 1024 (V) pixels

1024 (H) x 1024 (V) pixels

Net dimensions
(excluding Speakers/Stand)

830 (W) x 506 (H) x 92 (D) mm

1030 (W) x 636 (H) x 91 (D) mm

Net weight
(excluding Speakers/Stand)

24.6kg

34.9kg

Ambient
conditions

Temperature

Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C

Relative humidity

Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)

Power supply

AC100 - 240V, 50/60Hz

Power consumption/at standby

255W / <3W

365W / <3W

Audio output

12W + 12W (6Ω)

(RGB input)

Input signals

Input terminals

RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)

Video signals

0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60

Sync signals

H/V separate, TTL level [2KΩ]
H/V composite, TTL level [2KΩ]
Sync on green, 0.3 Vp-p [75Ω]

Recommended signal

46 modes

(Video input)

Input signals

Input terminals

AV1: composite video input terminal (RCA)
AV1: Y PB PR video input terminal (RCA)
AV1: L/R audio input terminal (RCA)
AV2: composite video input terminal (RCA)
AV2: Y/G PB/B PR/R video input terminal (RCA)
AV2: L/R audio input terminal (RCA)
AV3: composite video input terminal (RCA)
AV3: S video input terminal (RCA)
AV3: L/R audio input terminal (RCA)
AV4: composite video / S video / RGB / L/R audio input terminal (Scart)

Video signals

AV1: PAL, SECAM, NTSC4.43, NTSC3.58
AV1: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
AV2: PAL, SECAM, NTSC4.43, NTSC3.58
AV2: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60, RGB
AV3: PAL, SECAM, NTSC4.43, NTSC3.58
AV4: PAL, SECAM, NTSC4.43, NTSC3.58
AV4: RGB

Video output Signal

OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
AV4: composite video / L/R audio monitor-output terminal (SCART)

Recommended signal

15 modes