beautypg.com

Using the remote control – haier 0010518358 User Manual

Page 11

background image

10

11

To set the Timer for a 1-hour to 24-hour delay before the

air conditioner is turned off (the air conditioner must be

On):

1. Press TIMER. Timer On indicator light on the air conditioner

control panel will flash.

2. Press the TEMP/TIME up or down arrow button to change the

delay time from 1 hour to 24 hours.

3. After 5 seconds, Timer On indicator light on the air conditioner

control panel will remain on.

To set Timer to turn on the air conditioner, keeping

previous settings:

1. Turn on the air conditioner.
2. Press TIMER. Timer On indicator light on the air conditioner

control panel will flash.

3. Press the TEMP/TIME up or down arrow button to change the

delay time from 1 hour to 24 hours.

4. After 5 seconds, Timer On indicator light on the air

conditioner control panel will remain on.

To set Timer to turn on the air conditioner, changing the

previous settings:

1. Turn on the air conditioner.
2. Adjust the mode to Fan, Cool, Energy Saver or Dehum.
3. For Fan, Cool or Energy Saver mode, adjust the fan speed to

High, Med or Low.

NOTE: In Dehum mode, the Speed button will not operate.

NOTE: Remote control may differ in appearance.

NOTE: One CR2025 battery (included) powers the remote

control. Replace battery after 6 months of use, or when the

remote control starts to lose power.

Press ON/OFF to turn on the air conditioner.

Press MODE to choose Fan, Cool, Energy Saver or Dehum.

Press SPEED to choose High, Med or Low.

Power

Temperature

Timer

Press the TEMP/TIME up arrow button to raise the

temperature. Each time you press or hold the TEMP/TIME up

arrow button, the temperature will go up 1ºF until it reaches

86°F (30°C).

Press the TEMP/TIME down arrow button to lower the

temperature. Each time you press or hold the TEMP/TIME

down arrow button, the temperature will go down 1ºF until it

reaches 61°F (16°C).

Mode

Speed

Using the Remote Control