Huawei B260 Wireless Gateway V100R001 - Manual (Page 12)

HUAWEI B260 Wireless Gateway V100R001
Product Description
Issue 02 (2009-05-07) Commercial in Confidence Page 13 of 29
3.3 Software Specifications
Table 3-6 Software specifications
Item Description
Router
:
z
Supports static routing
z
Supports the default routing (the routing address is 0.0.0.0).
You can set the WAN connection to the default routing to
generate default routing table items
z
Supports the hybrid mode of bridging and routing
Supports ARP
Supports ICMP
Supports DNS Relay
NAT:
z Supports NAT, NAPT (compliant with RFC2663, RFC3022
and RFC3027)
z Supports fragment message identification for normal NAT
z Supports ALG
z
Supports NAT traverse of FTP, MSN and NetMeeting
z
Supports NAT traverse of VPN related protocol (PPTP and
L2TP)
Gateway
DHCP Server:
z The default IP addresses of the DHCP server is from
192.168.1.100 to 192.168.1.200. The default gateway address
is 192.168.1.1
z
The default DHCP lease is 24 hours
z
The DHCP Server can be enabled or disabled
z The address pool of the DHCP server can be configured.
z The lease can be configured
z
The IP address status can be displayed, such as the host
name, MAC address, IP address, and remaining lease
Data service HSUPA: DL 7.2Mbit/s UL 5.76Mbit/s
HSDPA : DL 7.2Mbit/s UL 384kbit/s
WCDMA PS: DL 384kbit/s UL 384kbit/s
WCDMA
CS: DL 64kbit/s UL 64kbit/s
EDGE : DL 236.8kbit/s UL 236.8kbit/s
GPRS : DL 85.6kbit/s UL 85.6kbit/s
GSM CS : DL 14.4kbit/s UL 14.4kbit/s