Harbor Freight Tools 94057 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. Item 60333 94057
Specifications
Capacity 1,200 lb., evenly distributed
(Static Conditions)*
Max. Tailgate Height 36″
Dimensions 72″ L x 30″ W x 2- 13 ⁄
16
″ H
Important Safety Information
1. Before use:
a. Read and understand manual.
b. Inspect before every use; do not
use if parts loose or damaged.
c. Turn vehicle’s ignition OFF
and set parking brake.
d. Clean dirt, oil and debris off
Ramp and allow Ramp to dry.
e. Unfold Ramp completely.
f. Set up only on solid,
level, dry surface.
g. Turn Ramp so flange end faces
downward. Position Ramp so that
tongues fully contact tailgate.
h. Properly connect safety chains.
2. Load vehicle slowly.
Do not ride vehicle down Ramp.
3. Do not exceed 1,200 lb. capacity,
evenly distributed.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
4. Use safety chains as intended only.
5. Use as intended only. Do not use:
a. as ladder,
b. if tailgate on carrying vehicle
is higher than 36″, or
c. to load vehicle with wheel
width wider than Ramp.
6. Ground contact. Use your Ramp
on a solid, level, flat, dry surface.
Make sure the Tongue edge fully
contacts the tailgate of the vehicle.
7. Clean Ramp. Prior to each use, clean
dirt, oil, or any debris off Ramp.
8. Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
9. This product is not a toy. Do not allow
children to play with or near this item.
10. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
11. All persons not involved in the
loading process must stand
clear of the loading Ramp.
Keep children away. Children must
not be allowed in the work area.