Safety information, Safety label location, Component & control location – HONDA GX340 User Manual
Page 2: Component & control, Location
COMPONENT & CONTROL LOCATION
SAFETY INFORMATION
SAFETY LABEL LOCATION
ENGLISH
FUEL TANK
OIL DRAIN PLUG
CHOKE LEVER
ENGINE SWITCH
RECOIL STARTER
AIR CLEANER
MUFFLER
STARTER GRIP
OIL FILLER CAP/DIPSTICK
ENGINE SWITCH
ELECTRIC STARTER
(applicable types)
ENGINE CONTROL TYPES
FUEL
VALVE LEVER
EXCEPT ELECTRIC
STARTER TYPES
CHOKE ROD
(applicable types)
ELECTRIC STARTER TYPES
ENGINE SWITCH
SPARK PLUG
FUEL FILLER CAP
2
Understand the operation of all controls and learn how to stop
the engine quickly in case of emergency. Make sure the operator
receives adequate instruction before operating the equipment.
Your engine’s exhaust contains poisonous carbon monoxide.
Do not run the engine without adequate ventilation, and never
run the engine indoors.
The engine and exhaust become very hot during operation.
Keep the engine at least 1 meter (3 feet) away from buildings
and other equipment during operation. Keep flammable
materials away, and do not place anything on the engine while it
is running.
Do not allow children to operate the engine. Keep children and
pets away from the area of operation.
This label warns you of potential hazards that can cause serious
injury. Read it carefully.
If the label comes off or becomes hard to read, contact your Honda
dealer for replacement.
For Canada:
French label is
packaged with
the engine.
The safety label should be located
either on the fuel tank, fan cover
or packaged loosely with the
engine to be applied by the
manufacture.
Read Owner’s Manual before operation.
The engine emits toxic poisonous carbon
monoxide gas. Do not run in an enclosed area.
Gasoline is highly flammable and explosive.
Turn engine off and let cool before refueling.
See the manufacturer’s
instructions provided
with the equipment.
The label is packaged
with the engine.
08/09/29 18:30:19 32Z5K603_002