Harbor Freight Tools 46361 - Manual (Page 5)

UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 11) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: All parts listed below refer to the parts listed and shown on pages 10 and
11 of this manual.
Placement Of The Air Filter System:
1. Caution: Make sure the Air Filter System is unplugged from its electrical supply
source before moving or placing the machine in a particular location.
2. Caution: If placing the Air Filter System on a table or shelf, make sure the ma-
chine is placed securely on a flat, level, sturdy table or shelf capable of support-
ing the weight of the machine.
3. Caution: If attaching the Air Filter System to a ceiling, make sure the machine is
attached securely to ceiling joists capable of supporting the weight of the ma-
chine.
4. To attach the Air Filter System to a ceiling; locate the four Hangers (part #31) that
are threaded into the four Nuts (#32) attached to the top edges of the machine.
(See Figure B, and Assy. Diagram.)
HANGER (#31)
FIGURE B
SKU 46361 PAGE 5
NUT (#32)
REV 07/03