HONDA HRR216PDA - Manual (Page 13)

CONTROLS & FEATURES
11
Cutting Height Adjustment Levers
The mower deck can be set to any of the six approximate settings.
Each wheel should be adjusted to the same position.
HRR, HRS
HRZ
Lower deck Move both the front and rear adjusters backward.
Raise deck Move both the front and rear adjusters forward.
Lower deck Move front adjusters forward & rear adjusters backward.
Raise deck Move front adjusters backward & rear adjusters forward.
HRS
1" (25 mm)
1-1/2 " (37 mm)
2" (50 mm)
2-1/2" (66 mm)
3" (75 mm)
3-1/2 (87 mm)
HRR/HRT
3/4" (19 mm)
1-1/4 " (29 mm)
1-3/4" (41.5 mm)
2-1/4" (54 mm)
2-3/4" (67 mm)
3-1/4 (79 mm)
FRONT
ADJUSTMENT
LEVER
REAR
ADJUSTMENT
LEVER
RIGHT SIDE SHOWN
3/4" (19 mm)
1-1/4 " (29 mm)
1-3/4" (41.5 mm)
2-1/4" (54 mm)
2-3/4" (67 mm)
3-1/4 (79 mm)
FRONT
ADJUSTMENT
LEVER
REAR
ADJUSTMENT
LEVER
RIGHT SIDE SHOWN
(front wheel in trailing position)