beautypg.com

Operation – Harman-Kardon AVR 230 User Manual

Page 25

background image

OPERATION

OPERATION 25

being used. For example, motion pictures or TV pro-
grams bearing the logo of one of the major surround-
encoding processes, such as Dolby Surround or DTS
Stereo, may be played in either the Dolby Digital, Dolby
Pro Logic II Cinema, DTS Neo:6 Cinema, or Logic 7
Cinema surround modes depending on the source
material.

NOTE: Once a program has been encoded with matrix
surround information, it retains the surround information
as long as the program is broadcast in stereo. Thus,
movies with surround sound may be decoded via any
of the analog surround modes such as Pro Logic II
Cinema, Logic 7 Cinema or DTS Neo:6 Cinema, when
they are broadcast via conventional TV stations, cable,
pay-TV and satellite transmission. In addition, a growing
number of made-for-television programs, sports broad-
casts, radio dramas and music CDs are also recorded in
surround sound. You may view a list of these programs
at the Dolby Laboratories Web site at www.dolby.com.

Even when a program is not listed as carrying intentional
surround information, you may find that the Pro Logic II,
Logic 7 Enhanced or DTS Neo:6, VMAx and the Hall or
Theater modes often deliver enveloping surround pre-
sentations through the use of the natural information
present in all stereo recordings.

Surround modes may be changed at any time by
using either the front panel or remote control. To
select a new surround mode from the front panel, first
press the Surround Mode Group Selector Button
7 until a mode from the desired major surround
mode group such as Dolby, DTS or Logic 7 is select-
ed. Next, press the Surround Mode Selector Button
8 to choose the specific individual surround mode.

To select a surround mode using the remote, press
the button for the major surround mode group that
includes the mode you wish to choose from: Dolby
w, DTS Surround x, DTS Neo:6

,

Logic 7

y, Stereo

or DSP Surround

k.

The first press of the button will show the current
mode from that group. To cycle through the available
modes in that group, press the button again until the
desired mode appears in the Lower Display Line
¯, the on-screen display and in the Surround
Mode Indicators

˘.

As the surround modes change, the choice will be
displayed in the on-screen display, in the Lower
Display Line

¯ and in the Surround Mode

Indicators

˘

.

The Dolby Digital, Dolby Digital EX and DTS 5.1,
DTS-ES Matrix and DTS-ES Discrete modes may only
be selected when a digital input is in use. In addition,

when a digital source is present, the AVR 230 will
automatically select and switch to the correct mode,
regardless of the mode that has been previously
selected. For more information on selecting digital
sources, see the Digital Audio Playback section below.

When the 6-channel/8-channel direct inputs are in
use there is no surround processing, as these inputs
take the analog output signals from an optional, exter-
nal DVD-Audio or SACD player, or another source
device and carry them straight through to the volume
control without any further digital processing.

To listen to a program in traditional two-channel stereo,
using the front left and front right speakers only (plus
the subwoofer, if installed and configured), press the
Stereo Button

until SURR OFF appears in the

Lower Display Line

¯, or press the Surround Mode

Group Selector

7 until the Stereo modes appear in

the on-screen display and Lower Display Line

¯.

Next, press the Surround Mode Select Button

8

until

SURROUND OFF appears in the on-screen

display and Lower Display Line

¯.

Digital Audio Playback

Digital audio is a major advancement over older analog
surround processing systems such as Dolby Pro Logic.
It delivers five discrete channels: left front, center, right
front, left surround and right surround. Each channel
reproduces full frequency range (20Hz to 20kHz) and
offers dramatically improved dynamic range and signifi-
cant improvements to signal-to-noise ratios. In addition,
digital systems have the capability to deliver an additional
channel that is specifically devoted to low-frequency
information. This is the “.1” channel referred to when you
see these systems described as “5.1,” “6.1” or “7.1”.
The bass channel is separate from the other channels,
but since it is intentionally bandwidth-limited, sound
designers have given it that unique designation.

Dolby Digital
Dolby Digital is a standard part of DVD, and is available
on specially encoded LD discs and satellite broadcasts
and it is a part of the high-definition television (HDTV)
system.

An optional, external RF demodulator is required to
use the AVR 230 to listen to the Dolby Digital sound-
tracks available on laser discs. Connect the RF output
of the LD player to the demodulator and then connect
the digital output of the demodulator to the Optical or
Coaxial Inputs

*(cf of the AVR 230. No

demodulator is required for use with DVD players or
DTS-encoded laser discs.

DTS
DTS is another digital audio system that is capable of
delivering 5.1 or 6.1 discrete or matrix sound field
reproduction. Although both DTS and Dolby Digital are
digital, they use different methods of encoding the sig-
nals, and thus they require different decoding circuits
to convert the digital signals back to analog.

DTS-encoded soundtracks are available on select DVD
and LD discs, as well as on special audio-only DTS
discs. You may use any LD or CD player equipped
with a digital output to play DTS-encoded discs with
the AVR 230. All that is required is to connect the
player’s output to either an Optical or Coaxial Input
on the rear panel cf or front panel

*(.

In order to listen to DVDs encoded with DTS sound-
tracks, the DVD player must be compatible with the
DTS signal as indicated by a DTS logo on the player’s
front panel. Early DVD players may not be able to play
DTS-encoded DVDs. This does not indicate a problem
with the AVR 230, as some players cannot pass the
DTS signal through to the digital outputs. If you are in
doubt as to the capability of your DVD player to handle
DTS discs, consult the player’s owner’s manual.

NOTE: Some DVD players have a default setting that
does not pass through the DTS signal. Before playing
DVDs with a DTS soundtrack, make certain that the
settings in your DVD player have been properly adjusted
so that DTS audio is passed through. Consult the
owner’s manual for your DVD player for more
information on making these settings.

Selecting a Digital Source
To utilize either digital mode, you must have properly
connected a digital source to the AVR 230. Connect
the digital outputs from DVD players, HDTV receivers,
satellite systems or CD players to the Optical or
Coaxial Inputs

*(cf. In order to provide a

backup signal and a source for analog stereo recording,
the analog outputs provided on digital source equipment
should also be connected to their appropriate inputs on
the AVR 230 rear panel (e.g., connect the analog stereo
audio output from a DVD to the DVD Audio Inputs
on the rear panel when you connect the source’s
digital outputs).

If you have not already configured an input for a digital
source using the on-screen menus as shown on page
17, first select the input using the remote or front-
panel controls as outlined in this manual. Next, select
the digital source by pressing the Digital Select
Button

q# and then using the

/

¤

Buttons

n on the remote or the

/

Selector Buttons

) on the front panel to choose any of the

(Continued on p. 27)

32

28

28

29