Hitachi 27CX01B User Manual
Page 23
CLOSED CAPTION
23
4
Press MENU and SECRET No. is registered.
To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1
"V-CHIP HAS BEEN ACTIVATED" will be displayed if you watch the program with Program Rating data the
same as you configured.
NOTE:
• "V-CHIP HAS BEEN ACTIVATED" will not be displayed if STATUS is not configured to "ON".
2
Press MENU, then "ENTER SECRET No." will be displayed.
3
Enter
the 4-digit SECRET No. using the REMOTE KEYPAD, then V-CHIP BLOCK will temporarily be
canceled. If the wrong SECRET No. is chosen "SECRET No. IS INCORRECT" will be displayed. Enter the
SECRET No. again in this case.
NOTE:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1
Repeat steps 1-3 of [1] MPAA RATING, then "ENTER SECRET No. will be displayed.
2
Enter
the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP BLOCK select mode will be
displayed. Repeat configuration of the V-CHIP BLOCK.