Harbor Freight Tools Four Post Boot & Glove Dryer 67326 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 67326
sPeciFications
Electrical Requirements
120 V~ / 60 Hz / 230 W
with heat, 30 W without
heat
Settings
Rocker Switch:
No Heat / Heat
Timer Switch:
Off, variable to 3
hours, with 10 minute
increments, up to 180
minutes
HouseHolD use only
e224797
unPackinG
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
comPonents & controls
Figure 1
Control Knob (13)
Heat Switch (14)
Toe Support (3)
Long Tube (2)
Short Tube (1)
(Inside Long Tube)
Wind Tube (17)
set uP & oPeration
read the entire rules For
saFe oPeration section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
to Prevent
serious injury
From acciDental
oPeration or electric
sHock:
Before assembly, cleaning or
adjustment, make sure the
cord is unplugged, and the
unit has cooled.
note: For additional information regarding
parts listed, refer to Assembly
Diagram at back of manual.
This dryer is for drying socks, gloves
and mittens as well as footwear and
boots.
Control
Knob
(13)
Heat
Switch
(14)
Figure 2