Harbor Freight Tools Central Pneumatic 1" Drive Industrial Air Impact Wrench 94108 User Manual
Page 7
Page 7
SKU 94108
For technical questions, please call 1-800-444-3353
Caution: Never increase pressure at the air compressor regulator to achieve more torque.
7. When finished, release the Trigger (36), and lift the Impact Wrench off the nut.
8. Remove the air supply hose, then squeeze the Trigger (36) again to release any
remaining air pressure in the Impact Wrench air chamber.
Maintenance
1. After each use, wipe the Impact Wrench with a clean cloth to remove any dirt and
grease buildup.
2. To maintain tool life, always lubricate the air line by adding a few drops of pneumatic
tool oil to the air line (or Air Inlet) before each use. Or, install the automatic oiler-filter
system as illustrated on page 5.
3. Before each use, drain water out of the air compressor tank and condensation from
the air lines. Refer to the Air Compressor Operation Manual.
4. Store the Impact Wrench in a clean and dry location.
OPERATION (continued)