Havis-Shields GSM32024 - Manual (Page 3)

SUBASSEMBLY:
Note: If doors have electric door switches, they must be reattached to original plug assembly. Switch
assembly must then be wired-tied down so it does not interfere with window or door latch operations.
View of Expedition door panel Remove plastic trim piece. Metal
clips hold on trim
Remove window/lock switch
assembly from door
Remov g torx
screws under door panel armrest
and remove screws
Remove plastic door panel ove hex head screws holding
lower section of door panel
Rem e trim piece coverin
Remove window switch and
reconnect. Wire tie switch in safe
location.
Recommended location to
relocate switch
Remove spe
Remove screws and unplug
aker from door panel.
connector
KK-K9-F14-K_INST_11-08 3