haier HDE10WNA - Manual (Page 12)

English
11
To remove and install the crisper: (see fig. # 7)
1. Grip the crisper firmly and slide out completely.
2. Replace the crisper by placing the crisper properly in position and
gently sliding it back into place.
Removing or replacing the crisper cover: (see fig. # 8)
1. Carefully grasp the crisper cover and slide out to remove.
2. To replace, slide the rear of the crisper cover into the right and left slots
above the crisper area and gently slide back into place.
Crisper and Crisper Cover
fig. # 7
fig. # 8
HDE10/11WNAWW 10/22/01 11:54 AM Page 12