Humminbird Wide 3D Vista - Manual (Page 32)

TRIPLOG
TripLog provides a time/distance calculation, based on input from the speed accessory. The timer
is started when the unit is first powered, and distance information is collected to provide elapsed
distance since power up, and the average speed. To enable the TripLog display, press ENTER.
Viewing Triplog while in a 2D view allows current sonar information to be displayed.
The TripLog can be reset at any time by pressing STOP. Press ENTER to return to the normal
screen.
Note: The Speed & Temperature accessory must be connected for TripLog to work.
SYSTEM OPTIONS
The System Options menu allows the adjustment of several additional features. These
adjustments are usually made initially, and rarely thereafter. To make these adjustments, first
enter the System Options full screen menu with the ENTER button. Then press MENU to choose
the category for adjustment, the UP and DOWN arrow buttons to adjust the setting, and the
ENTER button to return to the normal screen when you have finished.