HONDA 2010 Civic Sedan - Manual (Page 310)

Remove the socket by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
Test the lights to make sure the
new bulb is working.
Put the fasteners into the holes on
the trunk lid trim. Reinstall the
screws.
Push the trunk lid trim back into
position.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2.
1.
3.
4.
5.
6.
7.
8.
3. Except Si model
On all EX-L, Canadian Sport, and Si
models
Lights
Replacing a High-mount Brake
Light Bulb
Ma
int
e
na
nce
307
BULB
SOCKET
BULB
SOCKET
09/07/02 17:20:17 31SNA640_312