HONDA HRR216TKA - Manual (Page 14)

BEFORE OPERATION
12
Mulching Plug
The mulching plug helps to curve
the inside of the mower deck for
more efficient mulching.
Install and remove the mulching
plug by raising the rear discharge
guard as shown. The mulching plug
only fits one way. Remove the
mulching plug when using a grass
bag.
Cutting Height
Set all four adjustment levers to the
same cutting height position. Each
position changes the height
approximately 1/2 inch (13 mm).
To adjust cutting height, pull each
adjustment lever toward the wheel,
and move it into another notch.
If you are not sure what cutting
height to select, start with a high
setting and check the appearance of the lawn after mowing a small
area. Readjust cutting height if necessary.
REAR
DISCHARGE
GUARD
MULCHING
PLUG
ADJUSTMENT LEVERS
POM53763.book Page 12 Friday, February 11, 2005 10:58 AM