haier XQG50-600TXB - Manual (Page 4)

9. The washing machine should be place in
a well ventilated area maintaing a space
between walls or furniture.
10. Keep away from heat sources and direct
sunlight to prevent plastic and rubber com-
ponents from aging.
8. The washing machine must not be used in
the open or in area of high moisture as water
droplets may form on electrical components,
Air dry the appliance if the washing machine
components become wet.
1. Make sure that the washing machine is
securely connected to the water supply,
take the necessory precautions or contact
the local service center if the connection
is poor or there is a water leakage.
2. After turning the power off, turn the pro-
gram knob clockwise to set washing
program.
11. During installation, ensure that the electric
cable is not trapped by the washing machine and
avoid damage to the electric cable.
Dear customer, For the machine and your own
security, DO NOT REPAIR IT BY YOURSELF!
DO NOT USE THE WASHING MACHINE
WHICH SOME PARTS ARE LOST!
== =Use
Matters Needing Attention
2
I1: Power Switch EVC: Hot Water Valve
I2: Economic Wash Switch EVP,EVL: Cold Water Valve
I3: No Spin Switch P1,P2: Pressure Switch
TM: Timer Motor THR: Adjustable Thermostat
H: Heating Element D: Drain Pump
C:Capacitance S,W:Motor
Wiring Circuit
15