Hitachi AVC01U - Manual (Page 17)

16
ENGLISH
BASIC OPERATION
Power On/Off
Turn On the power of the unit.
To turn On the power to the unit:
1. Press the Power Switch on the A/V Center front or press
the Power (On/Off) button on the remote control.
The Indicating Lamp turns Blue.
The image will display on UT Monitor screen.
To turn Off the power to the unit:
1. Press the Power (On/Off) button on the remote control.
The image disappears from the UT Monitor screen. The
Indicating Lamp turns Red (Standby mode).
2. Unplug the AC cord from the wall outlet to completely turn
Off the power to the unit. The Indicating Lamp turns off.
NOTE
Due HDMI-CEC function pressing the power on/off button on the
remote control will power down both the UT Monitor and the A/V
Center.
The Indicating Lamp Status
Indicating
Lamp
Power Status
Off Off
Red Standby mode
Blue On
NOTE
If the image does not appear on the UT Monitor screen at all, or if there is any problem with it, see
“TROUBLESHOOTING” on 35 ~ 36 . This may help you to solve the problems.
After turning On, it takes about 6 seconds until the A/V Center starts up. Please note that buttons on the remote
control and the unit (such as the Power button) do not work during this period of time.
If power is interrupted during use of the unit, to avoid sudden surges of electricity when the power comes back on,
unplug AC cord before leaving home.
Power Switch
(on A/V Center Front)
Power On/Off button
Indicating Lamp