haier HBF855TVE - Manual (Page 15)

Insert the bolts.
5. If the machine is to be moved a distance location,
replace the vibration mounting locks which were re-
moved during installation as shown below.
1. Turn of the water and electricity supply af-
ter every wash. Open the door to prevent the
formation of moisture and odors. If the wash-
ing machine is left idle for a long period, drain
any remaining water in the machine and re-
place the drainage hose. 2. Unplug the machine during cleaning and
maintenance. Use a soft cloth dampened
with soapy liquid to clean the machine case
and rubber components. Do not use corro-
sive or abrasive chemicals or solvents.
6. If the washing machine is left
idle for a long period turn off the
water and electricity supply and
open the door slightly to prevent
the formation of moisture and
odors.
Remove the back
cover
.
Replace the rubber
plugs.
4. To prevent blockages to the water
supply or the ingress of contaminants,
clean the water inlet and inlet water
filter regularly.
Replace the back
cover
.
Tighten the bolts with a
spanner.
Maintenance
13
3.