HONDA 08B26-S5T-1000-91 User Manual

Page 6

6 of 14

AII 27936 (0408)

REAR CLIP
HOOKS (4)

15. Remove the rear seat cushion bolt, and remove

the rear seat cushion by lifting the rear of the
cushion to release the hooks and then pulling it
toward you.

16. Remove the clip that secures the floor carpet.

17. Fold the right rear seat-back forward. Remove the

hinge cover from the seat-back (three retaining
clips). Take care not to damage the retaining clips.

20. Remove the left rear seat-back center hinge (one

bolt).

21. Remove the clip from the floor panel behind the

seat-back.

22. Release the seat-back pin from the left rear side

panel trim by sliding the seat-back forward while
pushing it toward the outside. Remove the left rear
seat-back.

23. Open the screw lid from the left rear side shelf.

Remove the two self-tapping screws, and separate
the left rear side shelf from the C-pillar trim. Push
down to release the rear clip hooks, then pull the
shelf out toward you to remove it.

REAR
SEAT
CUSHION

HOOK

BOLT

CLIP

FLOOR
CARPET

CLIP

SEAT-
BACK
CENTER
HINGE

LEFT REAR
SEAT-BACK

LEFT REAR
SIDE PANEL
TRIM

LEFT PIN

BOLT
22 N·m
(16 lb-ft)

REAR SEAT
BELT

REAR SIDE
SHELF

SELF-TAPPING
SCREW

SCREW LID

C-PILLAR
TRIM

BOLT 22 N·m
(16 lb-ft)

CLIP

RETAINING
TAB

HINGE
COVER

SEAT BELT
ANCHOR

RIGHT REAR
SEAT-BACK

SEAT-BACK
CENTER HINGE

18. Remove the clip from the floor panel behind the

seat-back.

19. Remove the two bolts that fasten the seat-back

hinge bracket, and move the right rear seat-back
out of the way.