Trouble-shooting answer to question – haier HWM120-AS User Manual

Page 16

Text mode
Original mode

Trouble-shooting Answer to question

When the remained water is frozen

2~3L

Below 50

Prevent the freezing (be sure to discharge the water
completely after using)
After complete draining, set the "DRAIN SELECTOR"
at "OFF" . If it is set at "DRAIN", it will be rather
difficult for the frozen water to melt.

When the water is frozen
Pour hot water below 50

into the wash tub

to soak it completely. Then turn the pulsator
with hands gently. Please confirm the drainage
can work normally before next using.