Hunter Fan Type - Manual (Page 14)

14
45037-01 • 06/06/11 • Hunter Fan Company
7-5. To attach the lower switch housing, connect the upper
plug connector from the motor to the lower plug
connector in the lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit
together one way. Make sure the connectors are properly
aligned before connecting them. Incorrect connection
could cause improper operation and damage to the
product.
7-6. Place the lower switch housing assembly over the upper
switch housing. Align the side screw holes in the upper
and lower switch housings. Attach the lower switch
housing to the upper switch housing.
7-7. Install a shade onto the light bulb socket.
7-8. Screw the locking ring onto the light bulb socket.
7-9. Repeat the above steps for the remaining light bulb
sockets.
7-10. Install three 14W CFL light bulbs
Lower Switch
Housing
Housing
Assembly Screw
Plug
Connector
Detail
Steps 7-5 – 7-6
Shade
Plug
Connector
7 • Completing Your Installation With a Light Fixture