Harbor Freight Tools 67118 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. SKU 67118
cooled completely, to continue use,
remove any objects that may be on or
adjacent to the heater, plug the unit
in, then turn on the Power Switch.
WarNiNg: Wait for the unit to cool down
completely before storing. Storing
or moving this heater while hot or
plugged in could result in fire or
severe burns.
iNSpeCtiON aNd
maiNteNaNCe
tO preVeNt
SeriOuS iNjurY
FrOm aCCideNtal
OperatiON Or eleCtriC
ShOCK:
Before appliance inspection
or maintenance, make sure
the appliance’s power switch
is turned off, the cord is
unplugged, and the unit has
cooled completely.
tO preVeNt SeriOuS
iNjurY FrOm appliaNCe
Failure:
do not use damaged
appliances. if abnormal
noise, smoke or vibration is
detected, have the problem
corrected before further use.
all maintenance and service
should be performed by a
qualified technician.
BeFOre eaCh uSe, 1. inspect
condition of the Heater/Fan. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, and any other condition
that may affect its safe operation.
aFter uSe,
2. occasionally use
compressed air to blow dust out of
vents. Wipe external surfaces with
clean cloth.
WarNiNg! If the supply cord of this
Heater/Fan is damaged, it must be
replaced only by a qualified service
technician.