Hamilton Beach HBH650 - Manual (Page 5)

120 VAC, 60Hz
Power Requirements
Use a fused electric outlet for the blender. Depending on the model of your blender, the plug will look like
the following to meet power requirements:
Blender Operation – Quick Start Guide
1. Read Important Safety Instructions and Warnings
before use.
2. Place the blender on a dry, level surface.
3. Make sure the power switch is OFF (O). Plug the
blender into a grounded 3-prong electrical outlet.
4. Place the container on the base with ingredients
and container lid in place.
5. Press the Power ON (I)/OFF (O) button to turn the
blender ON (I). The red LED lamp indicates that
power is ON (I).
6. Adjust the timer knob to desired run time.
7. Select the desired function (HIGH, LOW or JUMP).
NOTE: Use the Jump Cycle for automatic speed
adjustment from LOW to HIGH during the
blending cycle.
Ground
prong
230 VAC, 50Hz 230 VAC, 50Hz
5