Hitachi 65T500A - Manual (Page 53)

53
ON-SCREEN DISPLA
Y
ASPECT MODE
Aspect Mode
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Press THUMB STICK
̆
,
̄
, to select menu item.
Press down on THUMBSTICK to select. A “
ͱ
” in the box indicates that the feature is ON.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press THUMB STICK
̆
,
̄
, to select menu item.
Press THUMB STICK ̇ or ̈ to adjust the function.
Press EXIT to quit the MENU, or select Aspect to return to the main menu.
Use this function to select the Picture Format Aspect Ratio.
NOTES: 1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on component video, S-Video, and 480i component signals.
3. See page 31 for Aspect Mode availability.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.