Harbor Freight Tools PACIFIC HYDROSTRAR 97005 - Manual (Page 15)

Page 15 SKU 97005 For technical questions, please call 1-800-444-3353.
tEcHNIcAL
SPEcIFIcAtIONS
Engine Type
13 HP / OHV
Recoil Start
Air Cooled
3600 RPM
Displacement 390cc
Rotation viewed from PTO
(power takeoff - the output
shaft)
Counterclockwise
(Facing the Shaft)
Fuel
Type 89+ octane unleaded gasoline
Capacity 1.7 Gallons
Engine
Oil
Type
SAE 25W (above 32° F)
SAE 15W-40 (at 32° F or below)
Capacity 37.2 Ounces (1.1L)
Spark Plug
Types LG F7RTC
Gap 0.027” to 0.031”
Engine
Approvals
California Emissions
U.S. EPA Phase II
Pump RPM 3400 RPM
Water Flow 4.0 Gal. Per Minute
Pressure
Rating
4,000 PSI
Pump Inlet
Pressure
30 PSI/4 Gal. Per Minute (Minimum)
80 PSI (Maximum)
Hose
Required
5/16” I.D.
Pump Oil
Type
SAE 25W (above 32° F)
SAE 15W-40 (at 32° F or below)
Capacity 15.2 Ounces (0.45L)
Water Temperature Up to 104° F / 40 ° C
Nozzles Included
0° (Red)
15° (Yellow)
40° (white)
Chemical (Black)
Spray Gun Type
Safety Lock-Off Triggered
Handle
Hose Length 32 Ft.
Hose Fittings Quick Connect
Hose Pressure 6000 PSI Maximum
Wheel Size & Inflation
4.10/3.50 Pneumatic
30 PSI (Cold)
SERvIcING
Risk of serious
personal injury
from accidental starting. turn
the Power Switch of the
equipment to its “OFF”
position, wait for the engine to
cool, and unplug the spark
plug wire(s) before performing
any inspection, maintenance,
or cleaning procedures.
damaged equipment can fail,
causing serious personal
injury. do not use damaged
equipment. If abnormal noise,
vibration, or excess smoking
occurs, have the problem
corrected before further use.
Maintenance Procedures
Many maintenance procedures,
including any not detailed
in this manual, will need to
be performed by a qualified
technician for safety. If you
have any doubts about your
ability to safely service the
equipment or engine, have a
qualified technician service the
equipment instead.
Engine Oil change
cAUtION! Oil is very hot during
operation and can cause burns. Wait
for engine to cool before changing oil.
Place a drain pan (not included)
1.
underneath the Crankcase’s Drain
Plug (14). (See Figure K, next
page.)
WARNING
REv 09b