Hitachi VT-F390A - Manual (Page 39)

Cable Converters Press CATV and This Number
Jerrold 1 1
Jerrold 2 2
Jerrold 3 3
Hamlin 4
Zenith 5
Scientific Atlanta 6
Pioneer 7
Philips 8
To operate the cable box once the remote is programmed for it:
Press CATV and then the button of the function you want.
Press VCR to operate your VCR with the remote again.
Advanced Operations (Stereo System)
Integrating Your Stereo System
There are several reasons to consider hooking up your stereo system with
your TV and VCR.
If your TV does not have stereo, you can get stereo quality from your VCR
by hooking it to your stereo receiver.
Even if your TV does have stereo, you can get better sound by taking
advantage of your stereo's better speakers.
You can record stereo audio on your VCR for longer play times, or use the
VCR as an extra tape deck for dubbing.
Hookup
Stereo System Hookup Illustration
To make this hookup, you need to be familiar with the options on your stereo
system. Look at the back of your receiver. Probably you have AUDIO IN
and OUT jacks for a second tape deck - labeled Tape 1 and 2, or AUX 1 and
2. Consult your stereo owner's manual for further information.
You will need two audio cables - the kind with two color-coded plugs on each
end (for left and right audio channels). With the power off:
Connect the right (red) and left (white) AUDIO OUT on the VCR to the
right and left AUDIO IN on the stereo system.