HONDA GCV135E - Manual (Page 16)

31
TROUBLESHOOTING
If any fuel is spilled, make sure the area is dry before testing the
spark plug or starting the engine. Fuel vapor or spilled fuel may
ignite.
DRAIN BOLT FUEL VALVE
O O F F F F
O O N N
When the engine will not start:
Is the fuel valve ON?
Is there fuel in the fuel tank?
Is gasoline reaching the carburetor?
To check, loosen the drain bolt with the fuel valve ON.
Is the control lever positioned properly (page 11 )?
Is the flywheel brake lever positioned to the RELEASED position
(page 12 )? (applicable types)
Is the spark plug in good condition (page 24 )?
If the engine still does not start, take the engine to an authorized
Honda dealer.
1.
2.
3.
4.
5.
6.
7.
32
SPECIFICATIONS
Engine
4-stroke, overhead cam, 1 cylinder
Dimensions
Power equipment
description code
Length
Width
Height
Dry weight
GJAAE
367 mm (14.4 in)
331 mm (13.0 in)
360 mm (14.2 in)
10.5 kg (23.1 lbs)
160 cm (9.8 cu-in)
Counterclockwise
Transistor magneto
Forced air
313 g/kWh (230 g/PSh)
11.4 N·m (1.16 kgf-m)/
2,500 rpm
4.1 kW (5.5 PS)/
3,600 rpm
64 x 50 mm
(2.5 x 2.0 in)
1.1 (0.29 US gal ,
0.24 Imp gal)
GCV160E GCV135E
GJAFE
351 mm (13.8 in)
331 mm (13.0 in)
353 mm (13.9 in)
10.4 kg (22.9 lbs)
135 cm (8.2 cu-in)
3.3 kW (4.5 PS)/
3,600 rpm
0.55 (0.58 US qt , 0.48 Imp qt)
Service classification SG or SH; SAE 10W-30
BPR6ES (NGK)
Engine type
Displacement
Bore x Stroke
Max. output
Max. torque
Fuel consumption
Cooling system
Ignition system
PTO shaft rotation
Fuel tank capacity
Engine oil capacity
Engine oil
Spark plug
64 x 42 mm
(2.5 x 1.7 in)
0.9 (0.24 US gal ,
0.20 Imp gal)
9.7 N·m (0.99 kgf-m)/
2,500 rpm
Specifications may vary according to the types, and are subject to
change without notice.