Hearth and Home Technologies Indoor/Outdoor Gas Fireplace Twilight-II-B - Manual (Page 35)

35 Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. M • 11/08
STEP 4. LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other end on the
peak of the burner. DO NOT cover any port holes.
STEP 5. LOG #4 (SRV2005-703): Locate the sharp notch on log #4 against the grate tine as shown. The smooth cutout
on the bottom of log #4 should rest on the burner surface. The side of Log #4 must be 3/4 inch from the nearest port hole
on the right side of log #4. DO NOT cover any port holes.
STEP 6. LOG #5 (SRV2005-704): Using the sharp notch on the heavy end of log #5, align it on the grate tine and set it
on the fl at area of log #4 as shown.
3 3
4 4
SHARP SHARP
NOTCH
NOTCH
SHARP SHARP
NOTCH
NOTCH
2 2
1 1
3 3
2 2 1 1
1
2
4 4
5 5
3 3 2
2
1 1
GRATE GRATE
TINE
TINE
3/4 IN. 3/4 IN.