Technical data – Husqvarna 326RX-Series User Manual

Page 29

English

– 29

TECHNICAL DATA

Technical data

Note 1: Noise emissions in the environment measured as sound power (L

) in conformity with EC directive 2000/14/EC.

Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.

Technical data

326Rx

Engine

Cylinder displacement, cm

24,5

Cylinder bore, mm

34,0

Stroke, mm

Idle speed, rpm

2700

Recommended max. fast idle speed, rpm

11000-11700

Speed of output shaft, rpm

8000

Max. engine output, acc. to ISO 8893, kW/ rpm

0,9/8400

Catalytic converter muffler

Yes

Speed-regulated ignition system

Yes

Ignition system

Manufacturer/type of ignition system

WalbroMB/SEM AM49

Spark plug

Champion RCJ 6Y

Electrode gap, mm

0,5

Fuel and lubrication system

Manufacturer/type of carburettor

Zama C1Q

Fuel tank capacity, litre

0,5

Weight

Weight without fuel, cutting attachment and guard, kg

4,9

Noise emissions

(see note 1)

Sound power level, measured dB(A)

108

Sound power level, guaranteed L

dB(A)

109

Noise levels

(see note 2)

Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:

88/97

Vibration levels

Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s

At idle, left/right handles, min.:

2,5/2,0

At idle, left/right handles, max.:

3,2/2,7

At max. speed, left/right handles, min.:

2,1/2,4

At max. speed, left/right handles, max.:

4,0/7,0