beautypg.com

Adjust the installation position – haier HWM40-32 User Manual

Page 7

background image

Adjust the installation position

The largest permitted slope of the bearing surface of the washing machine is 2.
Slanting or uneven ground will cause unstable operation of the machine. Please
check with following methods:

Hang a becket with weight to confirm if the washing machine is horizontal.

water inlet hose

water inlet jointer

control handle

push

water inlet entrance

Install the water inlet hose ; Select the water level

Insert the water inlet jointer into the
water inlet hose ,then push the jointer
into the water inlet on the control panel.
(To dismantle the water inlet hose,you only
need to push the control handle to the
direction indicated in the figure , then pull
the hose out.)

Fill the water to the water level selected
according to the quantity of the laundries.
Attention:

Put in the laundries first before

water inlet.

Do not exceed the " Maximum "

waterlevel ( water level 3 ) ,
otherwise the water may overflow
out of the machine.

Maximum

Minimum

Medium

water level
indicator