Reversible doors – Hotpoint FFP187B User Manual

Page 3

WARNING:
To avoid a shock hazard do not insert the discarded
plug into a socket anywhere else.
Fitting a new plug

IMPORTANT

WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

As the colours of the wires in the mains lead may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
-

Connect Green and Yellow wire to terminal marked ‘E’

or coloured

Green and Yellow.

Connect Brown wire to terminal marked ‘L’ or

coloured red or brown.

Connect Blue wire to terminal marked ‘N’ or coloured

Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a
13amp fuse. A 15amp plug must be protected by a
15amp fuse, either in the plug or adaptor or at the
distribution board.

If you are in any doubt about the electrical supply to
your machine, consult a qualified electrician before
use.

CE Marking certifies that this appliance conforms to
the following EEC directives :
Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC,

92/31/EEC & 93/68/EE

Reversible doors

∅