Harbor Freight Tools 47336 - Manual (Page 7)

Page 7 SKU 47336
2. Periodically check all nuts, bolts, and screws for tightness, especially the Blade bolt.
3. Store the Lawnmower in a clean, dry location.
4. Periodically lubricate the axles and wheels with a light oil.
Cutting Blade Removal
1. To remove and refit the Blade (17), turn the Lawnmower over to reveal the Blade and
Impeller (16).
2. Hold the Blade with a gloved hand. With the other hand, remove the Blade securing
bolt and washer using a suitable spanner wrench.
3. Remove the Blade. If sharpening is needed, it should be done by a qualified
technician.
4. To replace the Blade, align the two Blade holes onto the two lugs on the bottom of the
Impeller. Replace the washer and bolt with the spanner wrench. Securely tighten.
Locating Holes
Lugs
Bolt and Washer