haier L32A9 -AK - Manual (Page 41)

Stream media broadcast system
38
Stream media system setup
Note: Memory cards or USB devices are not
supplied with this TV.
USB setup
1 Insert USB in the card slots at the left side the TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter
the stream media system.
CARD setup
SETUP
File Copy
USB2
Remove USB1
Press ENTER key to play this devices
AAA Multimedia Player
1
Jack of card Instructions
Jack of SM card
Jacks of SD MMC MS card
Jack of CF card
Jack 1
Jack 2
DIGITAL MEMORY CARD
C OMPACT F LASH
128
MB
2
Insert the card as right direction. As following Card in common use
1 CF card
jack
CARD
M ULTI M EDIA
128
MB
2 MMC card 3 MS card
M
EMOR
Y
S
TICK
128
MB
4 SM card 5 SD card
ID 128MB
SD
128MB
This TV is compatible with the card of SD/MMC/CF/MS/SM
format.
How to use
USB1
jack jack jack jack
Note
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
2.Card reader in 1 cannot
simultaneously insert two kind
of cards in the graphical
representation position
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.
Remove USB2