Unpacking, Assembly – Harbor Freight Tools BIG TOP 92928 User Manual
Page 3
SKU 92928
For technical questions, please call 1-800-444-3353.
Page 3
11.
Replacement parts. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
12.
Do not assemble if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not assemble the product.
13.
Heavy, wet snow or extremely windy conditions could damage the Car
Canopy. It is recommended that the Tarp be removed under these conditions
to prevent damage to the Car Canopy or nearby property.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure that all parts are included. Refer to parts
list on the last page of this manual. If any parts are missing or broken, please call
Harbor Freight Tools at the number on the cover of this manual.
Assembly
1. Place 17 Steel Tubes (1) on the ground as illustrated below.
Caution: Be alert to possible wind damage; prolonged exposure to wind can cause
fasteners and hardware to loosen as the frame flexes. The Portable Garage Car
Canopy’s frame strength will be compromised if fasteners and hardware are not
tight. Periodically check and make sure all fasteners and hardware are tight. Tubes,
stakes, tie downs and rope should also be periodically checked to make sure the
unit is always structurally rigid.