Healthrider HRCR28720 - Manual (Page 11)

MAINTENANCE AND TROUBLE-SHOOTING
Inspect and tighten all parts of the AEROBIC RIDER 2 regularly. The AEROBIC RIDER 2 can be cleaned with a
soft, damp cloth; do not use solvents. To prevent damage to the monitor, keep liquid away from the monitor and
keep the monitor out of direct sunlight. When storing the AEROBIC RIDER 2, remove the batteries from the monitor.
HOW TO REPLACE THE BATTERIES
If the display of the monitor becomes dim, the AA batteries should
be replaced. Remove the battery cover from the monitor. Remove
the old batteries. Insert two new batteries into the monitor. Identify
the negative (–) and positive (+) ends of the batteries. The springs
in the battery compartment should touch the negative ends of the
batteries.
Re-attach the battery cover to the monitor.
HOW TO LUBRICATE THE AEROBIC RIDER 2
Every three months, a small amount of light multi-purpose oil
should be applied to the AEROBIC RIDER 2. Apply a few drops of
oil between the axle caps or axle fasteners and the frame in the
locations shown at the right. Make sure to apply oil to both sides of
the AEROBIC RIDER 2.
11
Monitor
(–) (+)
Battery
Cover
AA
Batteries
Apply Oil