Hitachi CP-SX1350 - Manual (Page 5)

5
Connection T Connection T o The Ports (continued) o The Ports (continued)
• Video signal: RGB separate, Analog, 0.7 Vp-p, 75
Ω
terminator (positive)
• H./V. sync. Signal: TTL level (positive/negative)
• Composite sync. Signal: TTL level
D-Sub 15 pin shrink jack
Pin Signal Pin Signal Pin Signal
1 Video output Red 6 Ground Red - -
2 Video output Green 7 Ground Green = -
3 Video output Blue 8 Ground Blue q H./Composite sync.
4 - 9 - w V. sync.
5 Ground 0 Ground e -
L
RGB OUT
5 4 3 2 1
6 7 8 9 0
e w q = -
Mini Din 4 pin jack
1 2
3 4
I VIDEO IN
• RCA jack
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60
• 1.0 ± 0.1 Vp-p at 75
Ω terminator
K
COMPONENT (C
R
/P
R
, C
B
/P
B
, Y)
• RCA jack x3
• System: 525i (480i), 525p (480p), 625i (576i), 720p, 1080i/1035i
• Y signal: 1.0 ± 0.1 Vp-p at 75
Ω terminated with composite sync.
• C
B
/P
B
signal: 0.7 ± 0.1 Vp-p at 75
Ω terminated
• C
R
/P
R
signal: 0.7 ± 0.1 Vp-p at 75
Ω terminated
VIDEO R-AUDIO IN-L S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C R /P R G/Y B/C B /P B H V
Y
CONTROL NETWORK
CR/PR Ca/Pa
REMOTE CONTROL
I J
K
L N O
N
REMOTE CONTROL
• 3.5 dia. Stereo mini jack
• To be connected with the remote control that came with the projector.
O DC OUT
J
S-VIDEO
Pin Signal
1
Color signal: 0.286 Vp-p (NTSC, burst), 75
Ω terminator
Color signal: 0.300 Vp-p (PAL/SECAM, burst), 75 Ω terminator
2 Brightness signal: 1.0 Vp-p, 75 Ω terminator
3 Ground
4 Ground