Home Dynamix HP-51M User Manual
Page 41
DYNAMIX HP-51M Coax MDU Master Bridge User’s Guide
35
Note that Telnet connection will be terminated automatically if the telnet client doesn’t input any command for 5
minutes; i.e. the console idle timer is 10 minutes (600 Sec).
Command Sets for Telnet Console
The following table lists all commands for Telnet console. The third column ‘
Description
’ explains what happen
when you run the ‘
Commands
’ in the first column and also explains the versatile options of the second column
‘
Arguments
’.
Some common formats for arguments are:
MAC address, format in ‘
nn
-
nn
-
nn
-
nn
-
nn
-
nn
where
nn
=00~FF’. As ‘00-01-40-13-03-36’.
IPv4 address, format in ‘
nnn.nnn.nnn.nnn
where
n
=0~9’. As ‘192.168.1.1’. Also applicable for
<mask>
,
<default gateway>
Network interface name, ‘
eth0
’ for LAN1/LAN2 interface, ‘
hpna0
’ for HCNA interface.
Flash ROM file id represented different firmware/driver, ‘
n
where
n
=0~12’,
‘
n
=0’: System bootcode (bootloader)
‘
n
=1’: System firmware (OS)
‘
n
=2’: Master HCNA driver (3110)
‘
n
=3’: 3010 EP HCNA driver
‘
n
=5’: 3110 EP HCNA driver
‘
n
=10’: 3010 EP diagnosis utility
‘
n
=11’: 3110 EP diagnosis utility
Only lowercase letter can be accepted. Typing commands followed by pressing ‘ENTER’ will execute the command.
Run any command with ‘-h’ argument will show you the usage
Commands
Arguments
[ ]
is optional
Description
dconfig
Dump all configurations/settings.
default
Reset all settings to factory default, except Password.
diag
-t
-r
On-line EP connection diagnosis.
-t: downstream SNR diagnosis(from Master to EP)
-r: upstream SNR diagnosis(from EP to Master)
: EP MAC
to be diagnosed